Login Status  Login Status

Not logged in

» Login
0 Product(s) in cart
Total $0.00
Online Payment Service

Home » All Products

 Checkout
SearchPriceKeyword
600 AMP Power Bar
1 of 2
Tin-Plated Copper Electrical Common Bus.  Solid CDA 110 Copper bar on tough glass filled polycarbonate mounting base.  Four 3/8-16 terminal  studs with four #8-32 screws for lighter wiring.  Perfect for 2/0 or 4/0 cables.  Rated for 600 amps continuous current. 

7 inches x 2 inches.  1.71 lbs

List Price: $103.97
Price: $99.99
Add to cart
150 Amp Power Post
1 of 2
Battery Cable Connection post with tin-plated copper distribution bus for smaller circuits.  150 amperes continuous rating.  Glas reinforced black nylon 8231 GHS base.   Main terminal diameter 5/16.  Comes with red rubber boot.


Price: $39.95
Add to cart
PowerSafe100
1 of 9
 The PowerSafe 100 is a 100kWh Solar Energy Storage device with 15 kW DC-AC pure sine wave inverter/charger and a complete battery management control and display system.

It is a complete OFF-GRID AC power system with a 240vac power output of 15kW continuous and up to 45kW surge in the standard U.S. 240vac L1, L2, Neutral, ground four wire output that can be wired into any standard loads panel.

It does NOT work with the utility grid but you can use grid (or generator) INPUT to recharge the batteries.

Better, it works fantastically with grid-interactive solar systems, replacing the grid and will actually recharge the batteries from your grid-tied inverters and solar panels.

This is NOT UL listed although it is compliant and is intended for stand-alone power applications.  It uses 20 Tesla Model S battery modules for energy storage. 
Price: $66,995.00
Add to cart



PowerSafe15
1 of 9
PowerSafe 15 RV and Marine Edition.  You asked for it. It's here.
 
The PowerSafe 15 is a 15kWh Solar Energy Storage device with 6 kW DC-AC pure sine wave inverter/charger and a complete battery management control and display system. This particular version is optimised for Recreational Vehicle and Marine use and Tiny House/Off-grid cabin installations.

It is a complete OFF-GRID AC power system with a 240vac power output of 6kW continuous and up to 18kW surge in the standard U.S. 240vac L1, L2, Neutral, ground four wire output that can be wired into any standard loads panel.

It does NOT work with the utility grid but you can use grid (or generator) INPUT to recharge the batteries.

Better, it works fantastically with grid-interactive solar systems, replacing the grid and will actually recharge the batteries from your grid-tied inverters and solar panels.
off
This is NOT UL listed although it is compliant and is intended for stand-alone off-grid power applications.  It uses 3 Tesla Model S 5.5kWh  battery modules for energy storage. 

Battery Display Included




Price: $8,995.00
Add to cart
PowerSafe60
1 of 10
 The PowerSafe 60 is a 60kWh Solar Energy Storage device with 15 kW DC-AC pure sine wave inverter/charger and a complete battery management control and display system.

It is a complete OFF-GRID AC power system with a 240vac power output of 15kW continuous and up to 45kW surge in the standard U.S. 240vac L1, L2, Neutral, ground four wire output that can be wired into any standard loads panel.

It does NOT work with the utility grid but you can use grid (or generator) INPUT to recharge the batteries.

Better, it works fantastically with grid-interactive solar systems, replacing the grid and will actually recharge the batteries from your grid-tied inverters and solar panels.
off
This is NOT UL listed although it is compliant and is intended for stand-alone off-grid power applications.  It uses 12 Tesla Model S 5.5kWh  battery modules for energy storage. 
Price: $39,995.00
Add to cart
Power Distribution Block with Clear Cover
Another peice of eye candy for the finishing touch on your quality build that comes straight from the car audio world. This power distribution box has a clear cover, 24 Kt. gold screws and super bright LED display to show off positive and negative cable connections. The design accepts 1 input with 4 outputs, nice.  Uses the increasingly popular AGU type fuse.
Price: $41.00
Add to cart



Raucher Enameled Pin
1 of 2
 The RAUCHER Enameled Pin for smokers of cigarettes, pipes and cigars.  An instant collectible. 

Few knew that the Obama's Affordable Health Care Act REQUIRES all residents of the United States of America who smoke cigarettes, pipes, or cigars or use smokeless tobacco wear a noticeable badge or device clearly identifying themselvs as a tobacco user anytime in public after 1 January, 2014.

Ostensibly, this provision identifies smokers and tobacco users so that other healthy Americans can avoid second hand smoke and smoking related irritants caused by smoking.  It is also required to help identify smokers for higher health care premiums, and yet to be determined health care service exclusions.  ITS THE LAW.

This beautifully crafted enameled metal pin with the traditional yellow "Star of David" design is marked RAUCHER- German for "Smoker" and is FULLY COMPLIANT with the Affordable Health Care Act.  Exploiting a loophole in the law, we discovered the identification is NOT required to be in English.  This unobtrusive pin - really a piece of jewelry - puts you in FULL COMPLIANCE while providing an elegant fashion statement as well.

Now using this tastefully elegant high quality enameled pin, you too can move about freely in public in full compliance with the law.

ORDER TODAY - supplies are limited.  This stylish Raucher Pin is destined to become an instant  collectible and is already in short supply.


COMING SOON - YES - Obesity Compliance Device too!.  

Price: $24.95
Add to cart
1 Rebling7002 Battery Receptacle
1 of 4
 Rebling 7002 standard duty 250F green receptacle and gasket is the female battery connector for your next battery box.  Carries 750 amps of continous current or up to 1500 amperes peak.  

Rebling plastics has developed a line of high quality high current milspec battery connectors used primarily in aviation applications.  Pricey, but extremely safe and extremely durable, these will last in electric vehicles for years providing a very low resistance high current connection with the convenience of a half-turn handle to disconnect the pack.

Price: $88.00
Add to cart
1 Rebling7009 Hi Temp Receptacle and Mating T Handle Connector
1 of 8
 Rebling 7009 high temperature 500F receptacle and gasket is the female battery connector for your next battery box.  Carries 750 amps of continous current or up to 1500 amperes peak. It has a lower resistance solid terminal post than the 7002 series and a much higher temperature resistance. The Rebling 7016-1 T-handle plug is ideal for cable terminals up to 3/0.

Rebling plastics has developed a line of high quality high current milspec battery connectors used primarily in aviation applications.  Pricey, but extremely safe and extremely durable, these will last in electric vehicles for years providing a very low resistance high current connection with the convenience of a half-turn handle to disconnect the pack.

Price: $345.00
Add to cart



1 Rebling Connector Attaching Plastic Cover
1 of 2
 Plastic cover for Rebling female receptacle.  This cover mounts permanently through the mount screw holes and flips down to cover the pins when not in use.



Price: $24.95
Rebling High Current Bulkhead Connector BLACK
1 of 7
 

Bulkhead Feedthrough Terminal BLACK

Many Rebling customers requested a method for making high-current electrical connections for applications that only require a few connect/disconnect cycles. Rebling Power Connectors responded by designing and manufacturing the BFT series of terminals. The BFT is a high current panel mount bulkhead connector with features unsurpassed by any other bulkhead terminal such as available 360° EMI shielding. The BFT conducts though a quarter pound of silver plated copper insulated in the toughest chemical resistant plastic available, so that it will provide you with years of reliable service.

We made the BFT to suit your needs with options to suit your application.

  • Termination - stud, threaded hole, or clamp point
  • A rubber boot in a variety of colors capable of sealing against #2 to 4/0 cables
  • Available tin plated brass or nickel plated aluminum conductors for weight or cost sensitive applications
  • A shell to provide strain relief in either insulating plastic, EMI shielding plastic, or nickel plated aluminum.

Whichever BFT you choose, you’ll get IP 67 sealing with your panel, extreme chemical and environmental resistance, and reliable high-current 

Price: $79.95
Rebling High Current Bulkhead Connector RED
1 of 7
 

Bulkhead Feedthrough Terminal RED

Many Rebling customers requested a method for making high-current electrical connections for applications that only require a few connect/disconnect cycles. Rebling Power Connectors responded by designing and manufacturing the BFT series of terminals. The BFT is a high current panel mount bulkhead connector with features unsurpassed by any other bulkhead terminal such as available 360° EMI shielding. The BFT conducts though a quarter pound of silver plated copper insulated in the toughest chemical resistant plastic available, so that it will provide you with years of reliable service.

We made the BFT to suit your needs with options to suit your application.

  • Termination - stud, threaded hole, or clamp point
  • A rubber boot in a variety of colors capable of sealing against #2 to 4/0 cables
  • Available tin plated brass or nickel plated aluminum conductors for weight or cost sensitive applications
  • A shell to provide strain relief in either insulating plastic, EMI shielding plastic, or nickel plated aluminum.

Whichever BFT you choose, you’ll get IP 67 sealing with your panel, extreme chemical and environmental resistance, and reliable high-current 

Price: $79.95

« | ...10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20... | »