Login Status  Login Status

Not logged in

» Login
0 Product(s) in cart
Total $0.00
Online Payment Service

Home » Battery Connections

 Checkout
PriceKeyword
Gigavac GX110 1000 Ampere Contactor
Previous1 of 5Next
 GIGAVAC GX110 1000 AMP CONTACTOR RELAY
This is the highest power contactor relay we have found.  It will do 1000 amperes of current continuously at up to 800volts and 5000 amperes for up to 10 seconds.  It is overkill for most electric vehicle builds but for the ultimate in safety and power switching capability, this is the 800 lb gorilla.

Relay is normally open.  Coil powered by 12v.  Draws up to 5.6 amps to close but holds position with 1.3 amps at 12v.  No coil suppression diodes required as internal coil suppression is provided.

The ultimate contactor.  We haven't found anything larger.
Price: $849.00
1 Rebling7009 Hi Temp Receptacle and Mating T Handle Connector
Previous1 of 8Next
 Rebling 7009 high temperature 500F receptacle and gasket is the female battery connector for your next battery box.  Carries 750 amps of continous current or up to 1500 amperes peak. It has a lower resistance solid terminal post than the 7002 series and a much higher temperature resistance. The Rebling 7016-1 T-handle plug is ideal for cable terminals up to 3/0.

Rebling plastics has developed a line of high quality high current milspec battery connectors used primarily in aviation applications.  Pricey, but extremely safe and extremely durable, these will last in electric vehicles for years providing a very low resistance high current connection with the convenience of a half-turn handle to disconnect the pack.

Price: $345.00
1 Rebling7002 Battery Receptacle and Mating T Handle Connector
Previous1 of 7Next
 Rebling 7002 standard duty 250F green receptacle and gasket is the female battery connector for your next battery box.  Carries 750 amps of continous current or up to 1500 amperes peak.  The Rebling 7016-1 T-handle plug is ideal for cable terminals up to 3/0.

Rebling plastics has developed a line of high quality high current milspec battery connectors used primarily in aviation applications.  Pricey, but extremely safe and extremely durable, these will last in electric vehicles for years providing a very low resistance high current connection with the convenience of a half-turn handle to disconnect the pack.

Price: $295.00



1 Rebling BFS131 Master Disconnect Switch
Previous1 of 3Next
 Rebling BFS-131 Master Disconnect High Voltage Interlock Switch is our most powerful switch capable of 600 continuous amps and up to 3000 amperes peak at voltages up to 2500v.

This switch features an OSHA lockout/tagout and an auxilliary microswitch to simultaneously disconnect contactors.  Environmentally sealed to IP67.  Designed specifically for electric vehicles, this is the 800lb gorilla of maintenance switches.
Price: $195.00
12v Battery Disconnect
Previous1 of 2Next
ProMax 12-Volt Heavy Duty PriorityStart! Automobile Battery Protector / Electronic Cut Off Switch

Heavy Duty Battery Disconnect Switch
-- Maintenance Free & Ecologically Friendly
 -- Totally Automatic Computerized Voltage Disconnect System
 -- Automatic Battery Reconnect that's Convenient & Safe
-- Easy to Attach in just 3 Simple Connections
-- Maximizes Battery Life, Preventing Electrical Damage
-- Disconnect Threshold is Factory Set at 11.7V for 12V Systems
-- Handles 1,000 Starting Amps
-- Designed for an Under-Hood Environment
-- Engine Run & Hazard Light Protection
 -- Universal Design fits both Top & Side-Post Batteries
 -- For Surge Protection / Fully Automatic Engine Starting Protection for your Car, Boat, or other Vehicle
-- Operates only when Accidental Deep Discharge of Vehicle [Auto] or Marine Batteries are Taking Place
-- To Operate Headlight Switch, Step on Brake Pedal, or any other Electrical Accessory, and it will Automatically Reconnect
-- Unit can only be used with Class 1 - 6 Vehicles with a Maximum of 1,000 Peak Starting Amps (Rated at 250 Continuous Amps)
-- Monitors Battery Voltage & Automatically Disconnects any Undesired Drain on your Battery as the Voltage Reduces (when Engine is not running)

How It Works: . PriorityStart! is an automatic heavy duty computerized on/off switching system, protecting battery voltage and starting power. If battery voltage drains below 11.7 volts when engine is off, it automatically disconnects the load. The battery voltage immediately recovers. . TO START: Just step on the brake pedal, and the starting power is automatically reconnected. It is designed to handle 1,000 Starting Amps. (PriorityStart! is not a battery charger or booster that is used after the battery has already been damaged.) Installation: .

PriorityStart! attaches easily to any 12 Volt top or side-post vehicle battery. No modifications are necessary. Three Easy Connections: 1. Connect existing vehicle positive cable to PriorityStart! 2. Connect PriorityStart! cable to battery positive post. 3. Attach ground wire to battery negative post. . 
Price: $189.00
450v 225A Fused Disconnect
Previous1 of 2Next
450VDC Fused Disconnect It has fuse inside 225A -

 Specification(ambient temperature=23°C) % of Ampere Rating (A) Operating Time Min Max

110% 4 hrs. -
200% 5 - 100 sec.
300% 0.5 -. 15 sec
500% - 1 sec.

Fuse characteristics may vary according to the conditions under which thay are used.

Rated Voltage: DC450V
Percentage of change in fuse current carrying capacity with change in ambient temperature: -0.13% / 1℃
Standard: JASO D622
Breaking Capacity: 2000A
Price: $169.00



Gigavac GV200 Contactor
Previous1 of 4Next
 GIgavac introduces a competitive response to the popular TYCO EV200 contactor.


Price: $139.00
600 AMP Power Bar
Previous1 of 2Next
Tin-Plated Copper Electrical Common Bus.  Solid CDA 110 Copper bar on tough glass filled polycarbonate mounting base.  Four 3/8-16 terminal  studs with four #8-32 screws for lighter wiring.  Perfect for 2/0 or 4/0 cables.  Rated for 600 amps continuous current. 

7 inches x 2 inches.  1.71 lbs

List Price: $103.97
Price: $99.99
Battery Box Heater
 SILCONE RUBBER HEATING PAD BATTERY BOX HEATER

This 10 x 24 inch heating pad features a 3M adhesive backing and a 300 ohm etched foil flat heating element in a silicon rubber mat.  We've had it specially designed for heating battery boxes.

The heater features an internal thermocouple that allows heating up to the 25C/77F cutoff.  It will restart when the temperature falls to 15C or 59F.  This thermocouple is rated for 250volts maximum and will fail at voltages above that.  However, it fails ON and can be used on higher voltage systems with an external temperature controller.

This heating element is 300 ohms.  Heating in watts is a function of the voltage and current through the device.


Price: $95.00



Gigavac HBD41A Maintenance Switch
Previous1 of 4Next
 GIgavac's new HBD41 maintenance switch offers a great value for the money.  Rated at 400A continuous duty at 1000v it can carry 2000 amperes for up to a minute.  It's designed specifically for EV applications.

The switch is hermetically sealed to lockout moisture and dirt from the contacts.  Features OSHA lockout/tagout.  
Price: $89.95
1 Rebling7002 Battery Receptacle
Previous1 of 4Next
 Rebling 7002 standard duty 250F green receptacle and gasket is the female battery connector for your next battery box.  Carries 750 amps of continous current or up to 1500 amperes peak.  

Rebling plastics has developed a line of high quality high current milspec battery connectors used primarily in aviation applications.  Pricey, but extremely safe and extremely durable, these will last in electric vehicles for years providing a very low resistance high current connection with the convenience of a half-turn handle to disconnect the pack.

Price: $88.00
Rebling High Current Bulkhead Connector BLACK
Previous1 of 7Next
 

Bulkhead Feedthrough Terminal BLACK

Many Rebling customers requested a method for making high-current electrical connections for applications that only require a few connect/disconnect cycles. Rebling Power Connectors responded by designing and manufacturing the BFT series of terminals. The BFT is a high current panel mount bulkhead connector with features unsurpassed by any other bulkhead terminal such as available 360° EMI shielding. The BFT conducts though a quarter pound of silver plated copper insulated in the toughest chemical resistant plastic available, so that it will provide you with years of reliable service.

We made the BFT to suit your needs with options to suit your application.

  • Termination - stud, threaded hole, or clamp point
  • A rubber boot in a variety of colors capable of sealing against #2 to 4/0 cables
  • Available tin plated brass or nickel plated aluminum conductors for weight or cost sensitive applications
  • A shell to provide strain relief in either insulating plastic, EMI shielding plastic, or nickel plated aluminum.

Whichever BFT you choose, you’ll get IP 67 sealing with your panel, extreme chemical and environmental resistance, and reliable high-current 

Price: $79.95

« Previous | 1 | 2 | 3 | 4 | 5 | »