Remember login on this computer?
Allow Promotional Emails
(We will never divulge your email to a 3rd party)
Not logged in
Tesla Model 3 Batteries
Tesla Model S Full Battery Pack
Tesla Model S Battery Modules
Motors and Controllers
Drive Train Components
Lithium Battery Cells
Meters and Instruments
Accessories and Cool Bits
Cooling and Heating
OEM Electric Vehicle Items
Tesla Drive Units
Product(s) in cart
Online Payment Service
Devices to use Tesla Model S Battery Modules.
We're really sorry...
...we don't currently have that one in stock
Please add your email and we'll notify you when it's back
» Tesla Model S Battery Modules
$100 - $200
$200 - $300
$300 - $400
$400 - $500
$500 - $600
$600 - $700
$700 - $800
$800 - $900
$900 - $1,000
$1,000 - $1,100
$1,100 - $1,200
$1,200 - $1,300
$1,300 - $1,400
$1,400 - $1,500
$1,500 - $1,600
$1,600 - $1,700
$1,700 - $1,800
$1,800 - $1,900
$1,900 - $2,000
$2,000 - $2,100
$2,100 - $2,200
$2,200 - $2,300
$2,300 - $2,400
$2,400 - $2,500
$2,500 - $2,600
$2,600 - $2,700
$2,700 - $2,800
$2,800 - $2,900
$2,900 - $3,000
$3,000 - $3,100
$3,100 - $3,200
$3,200 - $3,300
Vicor VI-J1N 75W 48 to 12vdc DC-DC converter
This half brick isolated DC-DC converter features an input range of 36-76vdc and an output voltage that can be adjusted around the nominal 12vdc output. Capable of 75 watts of power up to 6.25 Amps. This version features a flat plate heat sink for easy mounting and a small physical size.
4AN to 6AN Bulkead Adapter
4AN to 6AN Bulkhead Adapter. We use these to mount in the wall of a cabinet. It allows us to connect the 4AN hose on the inside of the cabinet that connects to Tesla battery module cooling fittings.
We put the 6AN side on the outside allowing us to connect larger coolant hoses externally with the pump and heater or heat exchanger.
-4 AN Black Nylon Braided Hose
10-ft sectuib if AN4 Black Nylon Braided Hose. This 350psi high quality hose has an inner diameter of 0.22 inches - just perfect to fit over the Tesla Model S Battery module coolant fittings.
4AN Hose Fitting
Female Hose end for 4 AN hose.
-4 AN RedNylon Braided Hose
10-ft sectuib if AN4 Red Nylon Braided Hose. This 350psi high quality hose has an inner diameter of 0.22 inches - just perfect to fit over the Tesla Model S Battery module coolant fittings.
How does it differ from the less expensive black braided nylong hose? Easy. It's red.
6AN Hose Fitting
Female Hose end for 6 AN hose.
Braided Nylon Reinforced Hose AN-6
Stainless Steel Reinforced Braided Nylon Line - Size AN-6
This high quality hose is designed to carry fuel, oil, water, other liquids and is perfect for EV cooling systems carrying 50% ethylene glycol and water. Stainless steel reinforcement provides strength while the braided nylon sheath protects from abrasion and chafing while providing outstanding flexibility. Inner tubing is a CPE sythetic resistant to almost any chemical or fluid. Withstands temperatures from -40F to 350F and pressures to 1500 psi.
Inner diameter is 3/8 inch AN-6 - perfect for use with the Summit Racing AN-6 series fittings we use for such cooling systems for inverters, controllers, and liquid cooled motors. This tubing also easily withstands temperatures for vehicle heating systems.
Solar Surge Protector
Protect your system from lightning strikes with the Midnite Solar Surge Protective Device (SPD). Designed for both AC and DC solar electric systems, it provides protection to service panels, load centers, or where the surge protector is directly connected.
Designed for both indoor and outdoor use, the SPD is offered in three different voltages—115, 300 and 600 volts. Protection is achieved by reducing the clamping voltage to a safe level that your system can sustain and that won't damage electronic components.
This Midnite Solar surge suppressor is a welcome replacement to arrestors that have been used in the past. Providing eight times the protection as previous arrestors, it is much better at clamping surges to a safe voltage.
8-port RJ-45 Patch Panel
This is a well built little patch panel box with metal enclosure. We punch down pin1 (ground), pin 4(CANHI) pin 5(CANLO) and pin 9 (12v) to match our scheme for carrying CAN and 12v power over CAT5 cables for the EVIC display, 6.6kw chargers, CAN GPS Real Time Clock module, and future enhancements to our battery controllers.
This little box let's you easily and conveniently plug in a display, two or three chargers, etc all with access to the battery controller CAN bus.
CAT6 RJ45 Through Bulkhead IP67 Feedthrough Connector
The cat 6 RJ45 shielded industrial panel mount is a female/female couple with 50 micron gold plated contact pins that are made to last on the panel mount bulkhead. It mounts from the front.
includes a water/dust cap that meets IP67 Water Protection and two o-rings.
We have adopted the CAT6 RJ-45 for use in providing Controller Area Network (CAN) connections.
Pin 1 - Orange/white - 12vdc
Pin 4 - Blue - CANHI
Pin 5 - Blue/White - CANLO
Pin 8 - Brown - 12v rtn
Notify when back in stock
Ethernet Connector RJ45 Socket Port Panel Mount Waterproof IP67 Heavy Duty
Zinc Alloy/Plastic IP67 RJ-45 Bulkhead connector 24mm. Ideal for passing CAN data into an enclosure via CAT5 cable.
Ethernet Connector RJ45 Male Plug Outdoor Waterproof IP67 Metal Heavy Duty
Zinc Alloy/Plastic IP67 RJ-45 Plug. Weatherproof 1/4 Bayonet Guard for CAT5 cables connecting to RJ-45 bulkehead connector. Ideal for EVTV CAN over CAT5 communications.