Login Status  Login Status

Not logged in

» Login
0 Product(s) in cart
Total $0.00
Online Payment Service
 

Home » Tools

 Checkout
PriceKeyword
Fluke Model 233 Multimeter
Previous1 of 3Next
JACK'S PERSONAL CHOICE IN MULTIMETERS.

The NEW Fluke 233 True-rms Remote Display Digital Multimeter gives you ultimate flexibility in unusual measurement scenarios. Place the removable display where you can see it and then put the meter where it is convenient for you-no more juggling of leads and the meter while stretching into a tight spot. You can now take measurements in hard-to-reach places, where machines or panels are physically separated from a limit or isolator switch, or in user prohibited areas such as clean rooms or hazardous areas.

Imagine the possibilities! What would you do if you could be in two places at once?


Price: $349.00
PowerLab 8 Battery WorkStation
Previous1 of 5Next
  We've used this Revolectrix CellPro PowerLab 8 device successfully to charge and discharge individual cells quite automatically. Originally designed for the radio controlled helicopter hobby, this device is up to 1344 watts and so offers some pretty interesting utility in charging, discharging, and bottom balancing individual cells, even fairly large ones.

Used in conjunction with a 12v battery source, the part we like best is its ability to discharge cells at rates up to 30 amperes recovering the energy INTO the 12volt battery.   Additionally, you can do a  constant current/constant voltage discharge to pretty much nail any bottom balance voltage you desire.


Price: $329.00
Wiha 13 pc Insulated Screw Driver Set
Wiha  thirteen piece 1000 Volt Rated insulated slotted and phillips screwdriver set.

Includes slotted 2.0, 2.5, 3.0, 3.5, 4.5, 5.5, 6.5, 8.0, 10.0mm. Phillips screwdriver 0, 1, 2, 3.

Each tool individually tested to 10,000 volts and certified to 1000 volt ac or 1500 volt dc. 


Price: $134.00



Terminal Lug Crimp Tool
This 16 ton hydraulic terminal lug crimp tool is what we use at EVTV to compress tinned copper terminal lugs on to 1/0 and 2/0 and 4/0 cable.  Comes with a set of dies to allow different size crimps.  Applies up to sixteen tons of pressure to the terminal lug compressing the collar on the copper wire strands of the cable.

This takes much less effort than the long handled manual crimp tools and makes a better looking and stronger crimp, assuring clean and tight connections.
Price: $129.00
Ratcheting Terminal Crimping Kit
Previous1 of 6Next
Easy to use crimping tool which will crimp the TE Ampseal automotive pins along with a number of others.  Plastic case and seven different die sets. 

Features an unusual disengagement lever at the top of the handle that lets you release a pin before fully compressing it.


Price: $112.00
250watt 0.1 ohm Economy Bottom Balancer
The economy bottom balancer/hand trimmer. 

When bottom balancing, at the end of the day we are taking out very small amounts of energy from each cell to get it to hit an exact voltage.  This small 250 watt 0.1 ohm power resistor is the perfect thing to manually trim LiFePo4 battery cells.

Just connect this across two terminals while observing cell voltage with a multimeter.  It's low tech but it draws 17-20 amps from a single cell and quickly gets the voltage down to where you want it.

The extra long format helps dissipate heat and the entire rig is very light and portable. Insulated clips make it easy to connect to cells without shorting or sparks. 


Price: $78.00



Wiha 13mm Insulated Ratchet Wrench
 This ratcheting box end wrench from Wiha is fully insulated to withstand 1000v.  At 13 mm it is perfect for tightening the M8 bolt used on almost all of our CALB CA series cells.

Insulated - 1000 Volt Rated 10,000 volt Tested
• Meets ASTM F1505, EN/IEC 60900, NFPA-70E
• Professional Series Long Life Insulated
• 12 Point Wrench, Precision Geared
• Double Covered Insulation Red Over Yellow
• Guaranteed Quality - Made In Germany
Price: $74.00
Wiha 10mm Insulated Ratchet Wrench
 This ratcheting box end wrench from Wiha is fully insulated to withstand 1000v.  At 10 mm it is perfect for tightening the M6 bolt used on almost all of our CALB CAM series cells.

Insulated - 1000 Volt Rated 10,000 volt Tested
• Meets ASTM F1505, EN/IEC 60900, NFPA-70E
• Professional Series Long Life Insulated
• 12 Point Wrench, Precision Geared
• Double Covered Insulation Red Over Yellow
• Guaranteed Quality - Made In Germany
Price: $72.00
Wiha Insulated Screw Driver Set
Wiha six piece 1000 Volt rated slotted and phillips insulated screwdriver set with SoftFinish handle.

The SoftFinish handle has a solid molded core with soft outer cushion grip and has 40 percent more torque than conventional handles.

The insulation is molded directly onto the blade for permanent bonding.

The blade is manufactured from CVM tool steel, hardened to average 58/60RC.

Meets insulation test standards to IEC 900, ASTM F-1505-01, New VDE 0682/part 201, DIN 7437. Responds to OSHA's use specification 29 CFR1910.

Six piece set includes slotted 3.5, 4.5 and 6.5mm. Phillips 1, 2 and 3.


Price: $72.00



Insulated Battery Wrenches 13mm 10mm
 Tighten battery terminal bolts SAFELY with these Wiha quality insulated spanners.  This set of two consists of 13mm and 10mm wrenches.

Our M8 Battery bolts require a 13 mm wrench while the small cells use M6 bolts requiring 10mm.  These two wrenches cover them both. 
Price: $69.00