Login Status  Login Status

Not logged in

» Login
0 Product(s) in cart
Total $0.00
Online Payment Service
 Latest items to be added to the EVTV Online Store


Andromeda Interface for GEVCU
Previous1 of 5Next
Andomeda Interfaces has done a special version of their EVIC display for our Generalized Electric Vehicle Control Unit or GEVCU.  And we've revised our software version 5.220 to make use of this display to display:

Tachometer - motor rpm
Motor temperature
Inverter Temperature
State of Charge of Battery Pack
With a display wide bar showing motor current as negative for forward with a separate bar for positive (regen) current.

Price: $695.00
Tesla Model S and Model X CAN Monitor
Previous1 of 4Next
SavvyCAN for Tesla Model S

SavvyCAN for Tesla Model S is a Controller Area Network Capture device capable of capturing CAN data directly from the Tesla Model S diagnostics connector even at the very high data rates found on the Tesla Model S.

The system consists of a data capture and analysis program for your Windows, Linux, or Mac OSX Laptop that connects to the EVTV CAN Microcontroller device by USB cable.  The CANDue features a wiring harness with the appropriate connector to connect right to the diagnostics connector below the 17 inch display on the center console of the Tesla Model S to access CAN3 - The Drive Train CAN Bus on the ModelS

Price: $295.00
Powerkey Pro 2400
Previous1 of 4Next



The PowerKey Pro was built with two things in mind, make it tough and make it flexible. So we made the PowerKey Pro reprogrammable, relegendable and open. That’s right, open. The PowerKey Pro is an open protocol CAN-BUS keypad the CANopen protocol.


We also believe the most important keypad configuration is your own. So we made reconfiguring the keypad as simple as possible. The address, button functions and LED indicator statuses can all be reprogramed within the keypad itself. 
Price: $199.95

Previous1 of 2Next
The EVTV Controller Area Network (CAN) Geopositioning Satellite System receiver receives positioning information from the GPS satellite system and converts it to CAN data frames for use on automotive and marine systems.

It provides data in CAN 11-bit or 29bit format at any CAN data rate.

1.  Speed in whole statue miles per hour.
2.  Direction of travel -Course in degrees to 2 decimal places.
3. Odometer - statute miles travelled since last reset.
4. UTC time hours/minutes/seconds for setting your real time clock
5. Lattitude and longitude to six decimal places (ie 37.123456)

Price: $199.00
1 CANKIT - CANbus kit with Microcontroller and Cable
Previous1 of 2Next
The EVTV CAN KIT contains a generic multicontroller clone of the popular Arduino Due board, a dual channel CAN bus shield with microSD card slot and EEPROM and a USB Cable.

Arduino has released a new 32-bit ARM based version of their popular multicontroller they call the Arduino Due. It actually has TWO Controller Area Network (CAN) controllers built into it - but no transcievers   In a stunning second omission, Arduino Due provides NO EEPROM for persistent memory.  You can't save variables from one power up to another.

 Ergo the EVTV CANDue 2.0 Dual Channel CAN bus Shield for Arduino Due.  This card features  TWO CAN channels along with the transcievers to enable them - tied to the CAN controller pins on the Due.  It also features a Single Wire CAN Chip and connections.

We also included a 2Megabit EEPROM chip - 256Kbytes of storage for persistent variables or pixel data.

And finally, we included a microSD card slot to hold up to 128GB of removable memory for logging data.

Convenient screw terminals allow connections to the vehicle 12v and chassis ground to power the entire rig of multicontroller and CAN bus board.  It also can read and write CAN messages to your vehicle OBDII CAN bus.

We also include the generic multicontroller board itself - a clone of the Arduino Due board.
Price: $149.00
600W Sealed Isolated DC-DC Converter
Previous1 of 5Next
 600 watt Isolated DC-DC Converter

This DC-DC converter takes input voltage of 144vdc nominal with a minimum of 108vdc and a maximum input of 180vdc.  It provides a 13.8vdc output. at up to 50 amps.  

Price: $149.00

EVTVDue Microcontroller
Previous1 of 3Next
Arduino has released a new 32-bit ARM based version of their popular microcontroller they call the Arduino Due. It actually has TWO Controller Area Network (CAN) controllers built into it - but no transcievers.

In a stunning second omission, Arduino Due provides NO EEPROM for persistent memory. You can't save variables from one power up to another.

So we have commissioned our own version - The EVTV CANdue Microcontroller.

This single board replaces the fragile micro USB connectors with a single strong Mini-B printer style USB port on the native USB port to the microcontroller.

We've also added a 2Mbit EEPROM chip providing 256 Kbytes of persistent memory to save program data or configuration details. AND most importantly, a Texas Instruments CAN transceiver on the board to enable the CAN controller in the SAM3X microcontroller chip allowing direct CAN communications.
Price: $99.95
Gigavac HBD41A Maintenance Switch
Previous1 of 4Next
 GIgavac's new HBD41 maintenance switch offers a great value for the money.  Rated at 400A continuous duty at 1000v it can carry 2000 amperes for up to a minute.  It's designed specifically for EV applications.

The switch is hermetically sealed to lockout moisture and dirt from the contacts.  Features OSHA lockout/tagout.  
Price: $89.95
Avenger Fly-Salter
Previous1 of 9Next
But A Salt's bigger brother, the improved model AVENGER.

Latching SAFETY button lets you pump shoot pump shoot like a normal shotgun without having to set the safety each time.

Cocking mechanism loads 15% more air pressure and an enlarged salt orifice puts 20% more salt in each shot.  Deadly to flies.  

Price: $59.95

Previous1 of 5Next
 It's here. The BUG-A-SALT.  This simple gun is NO toy.  It shoots a startingly effective shotgun blast of table salt three to four feet and is absolutely deadly to houseflies.  You can hardly miss.

An ounce of table salt gives you 50 shots - potentially 50 dead houseflies although we've taken out three flies with a single shot.  It's the ultimate test of hunting skill as you learn to patiently stalk, and then eradicate the enemy.  

One day with this superb firearm, and you will laugh out load at people swatting at flies with a fly swatter.  They just don't get it.

Price: $45.95
Adafruit Bluefruit BLE Shield
Previous1 of 5Next
Adafruit Bluefruit LE Friend Shield

This is the shield version of the Adafruit Bluefruit LE Friend SPI module we use in the new 6.2 version of our Generalized Electric Vehicle Control Unit.
Why offer a shield?  So you can add BLE connectivity to your own applications using our much less expensive EVTV Microcontroller.  This Arduino Due compatible board features an EEPROM for
persistent variable storage and a CAN bus.

Add this shield to it for BLE connectivity and develop your own iPhone or iTablet application to view data wirelessly.

Price: $19.95
Magnetic Smartphone Holder
Previous1 of 8Next
This item should get a design award.  It is a small gold-toned ferrous mount that mounts easily anywhere on your dash.  It comes with two magnetic disks.  Peel the backing away and stick the disc on the back of your iPhone -  in any kind of case.

You can now place the phone in position over the Tesla logo, and it magnetically holds the phone in position with just enough strength to hold it even while bumping down the road.  The base swivels in all directions, allowing you to aim the phone as you like for optimum viewing.  But you can remove it quite effortlessly when you leave the car.

We've seen many schemes for mounting iPhones and iTablets in cars.  Nothing comes close to this one.  

Price: $19.95

« Previous | 1 | 2 | 3 | »