Login Status  Login Status

Not logged in

» Login
0 Product(s) in cart
Total $0.00
Online Payment Service

Home » Accessories and Cool Bits

 Checkout
PriceKeyword
Lithium Fire Extinguisher 2.5 Gallon Class D
 This is a 2.5 gallon pressurized fire extinguisher.  But instead of water, it is chargeed with Spectrum FX Firebane 1179 - an aqueous based class D extinguishing agent specially formulated for metal fires and curiously effective at extinguishing lithium battery fires.

This extinguishing agent is entirely non-toxic and environmentally safe.
Price: $895.00
Lokar Ford Drive by Wire Throttle
Previous1 of 3Next
 Lokar Drive by Wire electronic throttle - Ford configuration.  Uses Williams Controls hall effect pedal sensor module.  5v and ground with two outputs.

BLING for your EV.  Perfect for dressing up your electric vehicle with the control you use the most.  Two 0-5v output signals.
Price: $495.00
Lokar Chrysler/Mopar  Drive by Wire Throttle
Previous1 of 3Next
 Lokar Drive by Wire electronic throttle - Mopar  configuration.  Uses Williams Controls hall effect pedal sensor module.  5v and ground with two outputs.

BLING for your EV.  Perfect for dressing up your electric vehicle with the control you use the most.  Two 0-5v output signals.
Price: $495.00



Lokar Corvette Drive by Wire Throttle
Previous1 of 2Next
 Lokar Drive by Wire electronic throttle for Corvette.  Uses Williams Controls hall effect pedal sensor module.  5v and ground with two outputs.

BLING for your EV.
Price: $475.00
Vacuum Braking System
Previous1 of 2Next
This electric vacuum braking system replaces the Internal Combustion Engine vacuum often used to power the power steering and braking in modern cars.

This kit consists of a VERY quiet (<50db) pump, high quality chrome racing vacuum reservoir, checkvalve, vacuum sensor, relay, and fuse. 

This pump will do 51 liters per minute at up to -0.8bar - the highest quality, lowest noise and highest power we could find.  Runs on 12vdc at 8 amps.

Price: $425.00
Hydraulic Brake Pressure Transducer
Hydraulic Brake Pressure Transducer let's you set up your AC drivetrain for the ultimate feel in regenerative braking. 

Features:

1. Specify 1/4 NPT or 1/8th NPT connection to existing hydraulic brake system.

2. Two foot cable with connetions for 5v power (red) ground (black) and signal (white).

3. 500 psi gauge presssure

4. 0.5 to 4.5v output

5. Withistands pressures to 1500 psi.


:
Price: $199.95



EVnetics 3-Wire Automotive Throttle Position Sensor
EVnetics 3-Wire Automotive Throttle Position Sensor

This is the best device we've found to use your EXISTING vehicle throttle assembly and throttle cable.  This is a 5kohm potentiometer 3 wire device with an arm you can connect the throttle cable to at various points depending on your pedal throw.  You can also position this arm on the device at different angles making mounting very flexible.    It has an excellent automotive grade weatherproof connector.  And it is specifically designed for automotive throttle assemblies.

Red wire for 5v, black for ground, and white carries the 0-5v throttle signal to your controller.
Price: $199.95
LEM Flux Gate Current Sensor
Previous1 of 9Next
LEM CAB300/500 CANbus current sensor for automotive applications : Very high accuracy flux gate current monitoring for hybrid and/or electric vehicle battery packs  No offset and no temperature drift.
+/- 400/500A. Runs on 12v.

:
Price: $139.00



Warp 7/8" Shaft Speed Rotation Sensor Kit

Knowing the speed of the motor shaft is essential to various EV operations including transmission shifting. Here's a bolt-on accessory that's made to be flexible, easy to install, and provides essential RPM data. This shaft speed rotation sensor kit mounts to the tail shaft of a variety of small shaft motors including Warp 8, Warp 9, Warp 11 and Impulse 9. Then provides the wiring to be directly connected to a multitude of guages both aftermarket and OEM or can be used with your motor controller. Beam up one and fine tune your investment.

Price: $99.00
Warp 1 1/8" Shaft Speed Rotation Sensor Kit

Universally fits larger shaft motors including Warp 13, Transwarp 7, Transwarp 9, Transwarp 11, As mentioned before knowing the speed of the motor shaft is essential to various EV operations including transmission shifting. Here's a bolt-on accessory that's made to be flexible, easy to install, and provides essential RPM data. This shaft speed rotation sensor kit mounts to the tail shaft of a variety of large shaft motors. Then provides the wiring to be directly connected to a multitude of guages both aftermarket and OEM or can be used with your motor controller. Beam up one, Scotty and fine tune your investment and avoid red lining before shifting.

Price: $99.00
AM1-AP-3A Inductive Proximity Sensor
AM1-AP-3A Inductive Proximity Sensor.

This is a three wire PNP inductive proximity sennsor with a two meter cable.  It can detect passage of ferrous materials (bolt head, screw, etc) on a rotating shaft to give you a tachometer reading.  This quite sensitive version can be 4mm away from the targer and still discern small metal pieces from the background.

This device is recommended by EVnetics for use with their Soliton line of controllers.  We tested it on the Elescalade and fell in love with it.  A small LED on the sensor actually lights with each pulse giving you an indication of operation.  We love it.
Price: $89.00

« Previous | 1 | 2 | »