New CALB CAM80FI Cells. Introduced June, 2014. Higher volumetric and gravimetric density for much smaller lighter packs. As much as 40% smaller and 20% lighter than the CA series cells.
These are similar LiFePo4 chemistry at a nominal 3.2 volts. These cells are 80 Ampere Hours. Features an aluminum alloy shell.
Nominal Voltage: 3.2v
Charging Voltage: 3.65v
Typical Voltage after charge: 3.36v
Capacity: 80 Ah
Height: 127 mm / 5 inches
Width: 173 mm/ 6.8275 inches
Thickness: 47.35mm/1.87 inches
Weight with strap: 2.18kg/4.8 lbs
Volume: 0.8829 liters
Gravimetric Density: 118 Wh/kg
Volumetric Density: 260 Wh/ltr
Cycle Life: >2000
Continuous Discharge: 2C - 160 amps
30 Second Discharge: 4C - 320amps
10 Second Discharge 8C -640 amps
Charging Temperature: 0-45C
Discharging Temperature: -20 to 55C
Face to face strap size: 45mm
Adjacent strap size: 45 mm
CA SERIES CELL USE AND CARE MANUAL - English
CA SERIES CELL USE AND CARE MANUAL-French
CA SERIES CELL USE AND CARE MANUAL-Portuguese
ORDER optional 45mm straps to interconnect cells. 45mm side to side and 45mm face to face. BATTERY SHIPPING CHARGES
This online store software will calculate shipping charges to a commercial address where no liftgate is required. This calculation includes a $30
HAZMAT fee we must pay to ship cells.
If you are shipping to a residential address, please notify us and we will have it delivered to the nearest UPS terminal. You will be notified and
can pick up your cells at the UPS terminal.
If you need delivery to a residential address, there is an additional fee of $240 per shipment for residential delivery with liftgate.
NOTE: The exterior of this cell is aluminum and is tied to the positive terminal of the cell. Battery boxes MUST be insulated and insulation must be installed between each cell in a battery box.